The track of the cnc router machines is divided into circular track and linear track (also called square track). If the machine is like a human, then these trajectories are the feet that people can move freely! It can be seen that the track plays a leading role in the cnc router machines and has a vital influence on the flexible operation of the cnc router machines! The quality of the track directly affects work efficiency and even the engraving effect of the entire product!
Orbits are divided into circular orbits and square orbits. The so-called circular rail is a cylindrical linear rail produced in China. The carrying capacity is high, the cost is low, the production cycle is short, and the installation is easy. Therefore, many processors have chosen to replace square linear guides. The circular track requires limited support and has poor rigidity. When it takes a long time, there will be a deviation, and the error will be greater than the square trajectory. The square rail refers to a square linear rail. It is produced abroad. The positioning accuracy is high, the friction coefficient is small, and the accuracy can be maintained for a long time. In particular, its static and dynamic friction is very small, and it drives the equipment. Low horsepower requirements can save a lot of energy.
Most of the rails on the market today use imported raw materials, and their prices are relatively expensive. In order to improve work efficiency and reduce costs, we must pay more attention to the maintenance details of the track. Different cnc router machiness require different maintenance methods. The guide rails of cnc router machiness, such as advertising cnc router machiness, wood cnc router machiness and machining centers. The maintenance method is as follows: after each operation, you need to clean the surface of the X, Y and Z axis rails, clean all the chips and dirt on the rail, and secondly check whether the surface of the rail is scratched. After cleaning, add lubricant to the guide rail to facilitate the next day’s work. The track maintenance method of the stone cnc router machines: Since the stone cnc router machines often uses water, the machine is relatively humid, and the track must be maintained every day.
Be careful when repairing the X, Y, Z three-axis polishing rod oil; the screw part must use high-speed butter. If the temperature of the working environment in winter is too low, the parts should be washed and cleaned with gasoline before refueling. Otherwise, the resistance of the transmission parts of the machine will be too large, and the machine will not be able to align. Note: Regardless of which type of cnc router machines must be paid attention to before maintenance, all power must be turned off first, check whether the power is still supplying power, and confirm that there is no safety hazard before proceeding to the next step! ! When designing works, don’t forget to take care of our motherland-the earth. We advocate green and environmental protection in the engraving industry.
