In the production of some woodworking enterprises, woodworking engraving opportunities produce a large amount of sawdust powder, so the use of vacuum cleaner equipment woodwoking cnc router machine has great advantages, can avoid the pollution of woodwoking cnc router machine, etc., but also conducive to normal maintenance and maintenance work. At the same time, physical injury to the operator can be avoided.
First of all, when choosing an engraving machine, we must choose an engraving machine with dust-proof and dust-removing device. Because it can suck away a large amount of dust generated during engraving at any time during the engraving process. Even so, there will still be a certain amount of dust in the air, so we recommend that operators wear protective glasses and dust masks during work to protect eyes and respiratory organs and prevent dust damage.
Furthermore, the vacuum cleaner plays an important protective role in the work process of the woodwoking cnc router machine, so we recommend that customers should equip the machine with a vacuum cleaner. On the one hand, it can maintain the sanitation of the surrounding environment, and on the other hand, it can better protect the woodwoking cnc router machine. The operator of the machine. The operator himself must also take appropriate protective measures. The installation of a vacuum device can not only extend the life of the engraving machine, but also save time for you to maintain the engraving machine.
The daily maintenance of the dust-proof device of the woodwoking cnc router machine is as follows:
First of all, we must check every day to remove all kinds of chips and other dirt on the surface to prevent the accumulation of debris, check whether the running track meets the requirements of lubrication, and prevent damage caused by huge friction caused by insufficient lubricating oil. Look at the surface. Whether it is very smooth and whether there are scratches, as a basis for early detection, these problems should be repeated before get off work in the afternoon. These tasks are the focus of every day and I hope to attract everyone’s attention.
Secondly, the content of the regular inspection is mainly the inspection of the dust cover of the organ of the engraving machine to prevent dust and abrasive particles from sticking to the surface of the cooling pipe. If these things exist, it will affect the service life of the lead screw and the accuracy of the work, resulting in product damage. If it is unqualified, if damage to the lead screw guard is found during the inspection, it should be repaired in time. When the damage is serious, it should be replaced in time. After each work, drain the remaining water in the water tank and wipe it with a dry cloth. Machines.
The woodwoking cnc router machine produced by our BCAM has a professional dust-free adsorption equipment. This equipment has obtained a national patent. For more information, please consult our online customer service to answer you.
