Bcamcnc

Index > SERVICE & SUPPORT

BCAMCNC Routing Cutters For CNC Router

Time:2019-01-04 11:23:54Hits:93Author:BCAM CNC Rouer
Routing Cutters,CNC Router tools,CNC router

3D V Grooving Tools

Solid carbide core, 5mm thick. A very stable tool with long life.

Designed for use with plastic, wood and MDF.

Routing Cutters,CNC Router tools,CNC router

Single Flute Compression Spiral Multipurpose

 
The up and down cut give a superior edge finish on both the top and bottom of the part
Routing Cutters,CNC Router tools,CNC router

Solid Carbide Upcut Spiral Ball Nose ( Metric) - Two Flute

Designed for carving, slotting and 3D modeling operations. The improved tip geometry gives a superior cut compared to most ballnose endmills for a super high finish on plastics, wood, composites and tooling boards.
Routing Cutters,CNC Router tools,CNC router

Single Flute - Solid Carbide Engraving Tools (Metric)

The half round engraving tools are offered with a wide range of tip sizes and angles to accommodate many engraving styles.  High quality tools designed and manufactured by Onsrud/LMT in the USA.
Routing Cutters,CNC Router tools,CNC router

Double Flute - Solid Carbide Upcut Spiral Wood Rout (Imperial)

Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired. Twin flute cutters are better suited to slotting operations where an exact diameter slot is required.

Designed for use with soft wood, hard wood, solid surface, MDF and engineering plastics.

Routing Cutters,CNC Router tools,CNC router

2 Flute Miniature Stub Router

Description
2 flute, solid carbide, stub length*, square end, 30° upward spiral.
Application
Suitable for applications where the standard length tool may lack rigidity. Flute length is typically half that of the standard tool.
Routing Cutters,CNC Router tools,CNC router

Solid Carbide Max Life Compression Spiral - Two Flute

Designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool under abrasive applications with superior part finish. Mortise compressions are designed with short upcut to allow mortise cut with downcut action.
Routing Cutters,CNC Router tools,CNC router

Solid Carbide Downcut Spiral Wood Rout - Two Flute

Designed for routing where downward chip removal, tool rigidity, long life, and high quality finish is desired.

The tool is ideal for use with natural wood and wood composites, prevents problems with breakout and lifting when cutting across the grain.

Routing Cutters,CNC Router tools,CNC router

Marathon Wood Rout Downcut (Coated) - Two Flute

The longest running downcut in the industry due to advancements in geometry and the addition of a unique Onsrud coating.

Downcut geometery is ideal from parts which are prone to movement as the part is forced on to the table whilst cutting.  The tool is ideal for top laminated boards such MFC and MDF, the downward geometery prevents break out of the lamiated surface whilst the specially formulated coating provides extremely long life.

Routing Cutters,CNC Router tools,CNC router

Two Flute Negative Radius Roundover Tool

Solid carbide, 2 flute router bits with negative radius for rounded corners.

This tool has been specially designed to add a 4mm radius to the edge of wood, plastic, acrylic and composite materials.

Routing Cutters,CNC Router tools,CNC router

Skimming Tool 7071-50 50MM

50MM TCT Router for bed skimming applications. Also suitable for facing natural woods and foams.
Routing Cutters,CNC Router tools,CNC router

Single Flute Upcut Router Bits Multipurpose

Single Fluted Upcut Router Bits Multipurpose.

These router cutters have been designed to cut a range of materials such as aluminium, brass, wood, mdf, engineering plastics and ACM.

Routing Cutters,CNC Router tools,CNC router

Single Flute Downcut Router Bits Multipurpose

Single Flute Downcut Router Bits Multipurpose

These router cutters have been designed to cut a range of materials such as aluminium, brass, wood, mdf, engineering plastics and ACM.

Routing Cutters,CNC Router tools,CNC router

Planing & Rebating Router Cutters With Replaceable Inserts - 80mm

- Suitable for planing and rebating in softwood, hardwood & man-made board.
- A good tool for fast removal of material over a large surface area.
- Scorers will give an improved finish at the bottom of the cut.
- Replaceable inserts ensure a constant cutting diameter and finish quality.
- For use on routers and machining centres with CNC control.
Routing Cutters,CNC Router tools,CNC router

Marathon Compression Spiral (Coated) - Two Flute

 

Marathon is the longest running compression tool due to advancements in cutting geometry and the addition of a unique Onsrud
coating. The coating is formulated to protect the cutting edge from the high temperatures generated when routing laminated and composite wood products.

 

This tool will give exceptional performance on hard materials such as MFC and FR MDF and often out performs PCD tooling.

Routing Cutters,CNC Router tools,CNC router

Highly Polished Single Flute Upcut Router Bits For Acrylic

Highly Polished Single Flute Router Bits For Acrylic.  The geometery of this cutter has been designed to give an exceptionally smooth finish when cutting acrylic, ABS, HIPS and other plastics.  The upward spiral provides excellent chip extraction for swarf removal.
Routing Cutters,CNC Router tools,CNC router

Highly Polished Single Flute Ball Nose Router Bits

Highly Polished Single Flute Ball Nose Router Bits
Routing Cutters,CNC Router tools,CNC router

High Speed ACM V-Grooving Tool (Solid Carbide)

Innovative V grooving tool for aluminium composite panels (DIABOND). Fully balanced for high feed rates, also excellent for acrylic, plastics, wood.

 

咨询反馈